Tag: Monterde

Mixer Plow Type

Since 1940 with more than 140 Facilities

MIXER PLOW TYPE

Our mixers plow type, are designed for high speed mixtures.

The design of the plows and the agitators, allows a quick and homogeneous mix of the products.

The parts of the machine are:

Mixer Chamber made of carbon steel.
Three quick discharge outlets at the bottom of the mixer chamber, driven by pneumatic cylinders with waterproof system.
Central shaft turning on bearings, with plows made of wear-resistant steel.
Drive by motor-gearbox.
Three motor-driven side agitators.
Tightness using compressed air for protecting the bearings.
Two inspection doors.
Majorities and additives inlets, and ventilation sleeve.
Installation of regulator group, water filter and pressure switch for compressed air.
Hopper for the quick discharge of the mixture.
Samples device driven by a pneumatic cylinder, located in the hopper that collects the mixture from the mixer.
Safety switches with electromagnet locking interlock, to avoid the opening of the inspection doors with the machine running, or to avoid it running with the doors opened.

The Mixers MONTERDE, are not just designed for mixtures based on Plaster or Anhydrite, but for other products in powder or granulated up 1mm.

TECHNICAL CHARACTERISTICS OF MIXER PLOW TYPE

It may vary depending on the density of the product.

Screw feeders include a butterfly gate and a variable frequency drive to regulate the discharge. Constructed of fully stainless steel and polished bottom mirror. Fluidifiers to facilitate discharge.

Laboratory Mixer

Since 1940 with more than 140 Facilities

LABORATORY MIXER

Mixer plow type, to make tests in the laboratory, and then extrapolate them to the industrial production.

The laboratory Mixers MONTERDE can be used not only for Plaster or Anhydrite based mixtures, but for product in powder up to 1 mm.

Parts of the machine:

Mixer Chamber made of stainless steel.
Inlet hopper with a grid to avoid the entrance of weird objects, and a butterfly manual valve to keep tightness the mixer chamber.
Quick discharge outlet driven by a pneumatic cylinder with a specific tightness system, and a manually driven valve to command the piston.
Central shaft with plows, all made of stainless Steel, turning over bearings.
Drive by a motor-gearbox.
Two side frames, motor driven.
Mechanical labyrinth for tightness of the bearings.
An inspection door with interlocking security switch, that prevents the opening when the mixer is working.
Depressurization Sleeve at the top of the machine.
Mixer set mounted on rubber mounts fixed to a main frame.
Hopper for collecting mixtures, fixed to the mixer with quick clamps system for easy installing and removing, including wheels to manipulate easily, made of carbon Steel painted.
Support for the whole parts made of carbon steel, and with a height adjustable support feet.