Trc-Monterde

  • +34 925 55 50 29
  • info@trc-monterde.com

Tag: Anhydrite

Hammer Mill

Since 1940 with more than 140 Facilities

HAMMER MILL

The hammer mill MONTERDE is a machine designed for:

  • Grinding both, the gypsum up to a suitable granulometry for feeding the Plaster, Plaster of Paris or Anhydrite kiln, wether direct fire or indirect fire kilns.

  • Grinding plaster, plaster of Paris or Anhydrite to the suitable granulometry according to the final purpose/use of the product.

It contains the following parts:

  • Shaft – Rotor for the hammers mounted on bearings.

  • Hammers made of manganese cast iron.

  • Outlet grid or sieve.

  • Inertial Wheel.

  • Pulley.

  • Safety covers on the inertial wheel and the drive.

  • Rails for mounting the motor and tensioning the belts.

  • Safety switch with electromagnetic locking key for safe maintenance opening.

  • Product distributor at the inlet.

  • Metal support base with screw clamps for fixing the mill.

  •  Rubber joint between the metal support base of the mill, and its chassis.

The hammer mill MONTERDE, are not just valid to grind Plaster and Anhydrite, also can be grinded any product in powder or granulated with the entrance grain size and suitable hardness.

TECHNICAL CHARACTERISTICS OF HAMMER MILL

It may vary depending on the input grain size.

* It may vary depending on the input granulometry and the hole Ø of the perforated sheet.

Output production and granulometry will depend on the meshes of the probabilistic screen installed in a closed circuit next to the mill (see closed circuit diagram).

RETURN

Pin Mill

Since 1940 with more than 140 Facilities

PIN MILL

The Pin mill, is a machine designed for grinding products to a granulometry from 0 to 200 micron, as a part of a closed circuit with a windwirl separator.

Our pin mill, is specially designed to grind plaster and plaster of Paris. They are made of carbon steel plate 20 mm thickness, electro welded and lining internally with shield plates with concentrical pins made of manganese steel.

It is contains the following parts:

  • Access door to the internals with lateral hinges.

  • Product inlet with simple port

  • Rotary cage to prevent the inlet of weird bodies.

  • Rotor made of wear resistant Steel, with pins forming concentric circles and shaft turning on bearings.

  • Outlet grid made of perforated steel plates.

  • Machining frame for mounting the outlet grids.

  • Fan for cooling the bearings.

  • Safety covers on fan and on drive.

  • Safety switch with electromagnetic locking key on the access door.

  • Rails for mounting the motor and tensioning the belts.

  • Metallic support baseframe with screw clamps for fixing the mill.

  • Rubber base between the base flange of the mill and the frame.

The pin mills MONTERDE are not only designed to grind Plaster, Plaster of Paris and Anhydrite, but other products with the proper granulometry and hardness.

TECHNICAL CHARACTERISTICS OF THE PIN MILL

molino pitones

* Production working together with a pneumatic separator to achieve a grain size of 1% maximum rejection over 0.200 mm

RETURN

Services

Since 1940 with more than 140 Facilities

ENGINEERING

The TRC-MONTERDE Brand has its own highly-qualified engineering department which focuses on the study of process, machinery designs, manufacturing of machinery  and lay-outs of facilities.

MANUFACTURING AND REPAIR

TRC-MONTERDE has its own workshops with all the equipment and tools necessary for manufacturing and maintaining the customers’ machinery.

Play Video
Play Video

ASSEMBLY

TRC-MONTERDE has an experienced team for the assembly “Turnkey” of complete process lines of Plaster, Plaster of Paris, Anhydrite, Perlite and mixing plants to obtain derivatives of those products.

THERMOGRAPHY

TRC-MONTERDE has the necessary equipment to carry out thermographic studies of processes. With the thermal imager we can streamline repairs, carry out preventive maintenance and carry out energy saving studies..

INSPECTION CAMERA

We have a high resolution inspection camera, with LED lighting and can be remotely adjustable. This equipment is essential to be able to carry out evaluations inside furnaces, pipes and conduits in general, to carry out actions on machinery or to carry out preventive maintenance.

Play Video

AUTOMATION

The TRC Brand has more than 15 years of experience in the industrial process and automation field, likewise in design, installation and commissioning.

We are specilialists in installations for plaster, plaster of Paris, anhydrite, perlite and mixing plants to obtain derivatives.

We deliver all our facilities fully automated with the latest technologies, in order to guarantee the best quality and the maximum production with the lowest costs. We have our own Scada Software, exclusively designed for this kind of installations.

 

 

VISIT AUTOMATION WEB
TOP