Trc-Monterde

  • +34 925 55 50 29
  • info@trc-monterde.com

Tag: Anhydrite

Additive Dosing Unit Mixing Plant

Since 1940 with more than 140 Facilities

ADDITIVE DOSING UNIT MIXING PLANT

Hopper to store and dose the corresponding additive. It is made of stainless steel.

The products to dose can be either pure additives or premixed.

It contains the following parts:

  • Hopper with lid.

  • Screw conveyor made of stainless steel.

  • Agitator at the bottom of the hopper to break the product vaults.

  • Drive by a motor-gearbox.

  • Pneumatic valve to discharge.

  • Minimum level Switch support.

  • Minimum level Switch.

  • Grid to avoid the entrance of weird objects.

  • Pneumatic membrane to facilitate the discharge.

 

TECHNICAL CHARACTERISTICS OF ADDITIVE DOSING UNIT MIXING PLANT

* May vary depending on the density of the product.

Screw feeders include a butterfly gate and a variable frequency drive to regulate the discharge. Constructed of fully stainless steel and polished bottom mirror. Fluidifiers to facilitate discharge.

RETURN

Majority Dosing Unit Mixing Plant

Since 1940 with more than 140 Facilities

MAJORITY DOSING UNIT MIXING PLANT

The majorities dosing unit doses the corresponding product in the majority weigher.

The majority products that commonly are dosed are:

  • Plaster / Plaster of Paris (Semi-hydrate).

  • Anhydrite II.

  • Lime.

  • Calcium carbonate.

  • Vermiculite.

  • etc

It is made of steel plate.

It contains the following parts:

  • Hopper with an inspection door, and a sleeve for ventilation.

  • Screw conveyor sized according to the required transport capacity, and a tubular housing made of carbón steel.

  • Drive by a motor-gearbox.

  • Pneumatic valve to discharge.

  • Level Switch.

TECHNICAL CHARACTERISTICS OF MAJORITY DOSING UNIT MIXING PLANT

* May vary depending on the density of the product and the length of the auger.

The dosing threads include a butterfly gate and a frequency variator to regulate the discharge.

RETURN

Additives Weigher Mixing Plant

Since 1940 with more than 140 Facilities

ADDITIVES WEIGHER MIXING PLANT

Weigher for weigh the additives involved in the mixture, either pure additives or premixed.

The weigher is installed in an isolated steel structure, mounted on rubber mounts with antivibrations to improve the accuracy of the weight of the product.

It consists of the following parts:

  • A Hopper from 10 to 25 litres made of stainless Steel plate, with BA inner surface.

  • Pneumatic valves for discharging.

  • Stainless steel lid with inlet nozzles for each product to be weighed.

  • Flexible connections in all the inlets and in the outlet.

  • Load cells.

  • Sum box.

  • Vibrator to facilitate the discharge of the additives to the mixer.

TECHNICAL CHARACTERISTICS OF ADDITIVES WEIGHER MIXING PLANT

RETURN